About: 1575 / 1625, Austria     Goto   Sponge   NotDistinct   Permalink

An Entity of Type : ecrm:E22_Man-Made_Object, within Data Space : data.silknow.org associated with source document(s)

The lower part of the casket is decorated with ten arched panels of glass decoration depicting biblical scenes. These panels are separated by 14 busts, male and female, from which emanate gilded 'rays' of glass. White glass 'clouds' surround their heads. The bottom edges of the casket are decorated with straight and barleysugar twist rods of glass in various combinations of colours. The bottom corners are decorated with small 'coils' of polychrome glass. Each scene in the ten arched panels is backed with silk which has faded to a neutral beige colour and some of the glass around the panels is tinned on the reverse. The upper edge of the base of the casket is edged with gimp. The style of lamp-worked decoration is close to that of a number of panels at Schloss Ambras, the place where Archduke Ferdinand of the Tyrol had his court glasshouse, from 1572 until 1591, which was manned by Venetian glassmakers. These panels were already listed in the 1596 inventory of Ambras. However, the style of the modelling, in particular of the figures, the clouds and the rays of light, are remarkably similar to that attributed to workshops in Nevers. Lamp-working was a skill that a craftsman could carry from country to country in his search for employment so it is difficult to associate these pieces with a particular manufacturing centre. The subjects depicted on the casket glass reliefs are: Moses on Mount Sinai Moses and the Brazen Serpent Three kings hanging on a tree, soldiers and dead kings below Agony in the Garden (unsure if this is what is depicted) House with trees Jacob's Dream Sacrifice of Isaac Satan and an angel below a tree, with a recumbent figure, two women below An angel among clouds, above a wood On a rock, three figures with spears; below are two women and a man driving out a boy

AttributesValues
rdf:type
rdfs:label
  • 1575 / 1625, Austria
rdfs:comment
  • The lower part of the casket is decorated with ten arched panels of glass decoration depicting biblical scenes. These panels are separated by 14 busts, male and female, from which emanate gilded 'rays' of glass. White glass 'clouds' surround their heads. The bottom edges of the casket are decorated with straight and barleysugar twist rods of glass in various combinations of colours. The bottom corners are decorated with small 'coils' of polychrome glass. Each scene in the ten arched panels is backed with silk which has faded to a neutral beige colour and some of the glass around the panels is tinned on the reverse. The upper edge of the base of the casket is edged with gimp. The style of lamp-worked decoration is close to that of a number of panels at Schloss Ambras, the place where Archduke Ferdinand of the Tyrol had his court glasshouse, from 1572 until 1591, which was manned by Venetian glassmakers. These panels were already listed in the 1596 inventory of Ambras. However, the style of the modelling, in particular of the figures, the clouds and the rays of light, are remarkably similar to that attributed to workshops in Nevers. Lamp-working was a skill that a craftsman could carry from country to country in his search for employment so it is difficult to associate these pieces with a particular manufacturing centre. The subjects depicted on the casket glass reliefs are: Moses on Mount Sinai Moses and the Brazen Serpent Three kings hanging on a tree, soldiers and dead kings below Agony in the Garden (unsure if this is what is depicted) House with trees Jacob's Dream Sacrifice of Isaac Satan and an angel below a tree, with a recumbent figure, two women below An angel among clouds, above a wood On a rock, three figures with spears; below are two women and a man driving out a boy (en)
  • The wooden structure of this casket is entirely covered with glass rods, strips of flattened glass and lamp-worked figures and ornaments. The elaborate decoration includes several scenes from the Bible, built up of lamp-worked figures and foliage, interspersed with pieces of mineral, all stuck onto the frame with a resinous material and backed with fine silk. Such fine lamp-worked scenes were first developed by Venetian glassmakers on the island of Murano. However, the style of our casket is particularly close to some lamp-worked panels in the collection of Schloss Ambras, the castle of Archduke Ferdinand of Tyrol. These panels can already be identified in the 1596 inventory of Ambras. Archduke Ferdinand II of Tyrol (1529-1595) built the extensive Ambras castle on a mountain top overlooking Innsbruck. A true “Renaissance prince” and an enthusiastic patron of the arts and sciences, Ferdinand amassed a large collections of artefacts for which he built a special display room. At Ambras, Ferdinand also ran a glass workshop from 1572 until 1591 which he manned with Venetian craftsmen from Murano. They introduced lampworking, a technique that used heat from a lamp to melt and shape the glass. It is most likely that our casket was also the work of the Venetian craftsmen working at Ambras in the Tyrol. Inside, the casket has several compartments with mirror-covered lids which were probably used to store precious objects such as jewellery. (en)
  • Wood casket with lamp-worked glass reliefs. Probably made in Venetian glassworks in Hall-in-Tyrol, Austria, late 16th or early 17th century. (en)
  • The lampworked figures and ornaments are probably made at the court glasshouse of Archduke Ferdinand of the Tyrol, at Schloss Ambras (Innsbruck). Venetian glassmakers were working there from 1572 until 1591. [2009] Casket South German or Tyrolese; 1572-1600 The wooden structure of the casket, which opens, is covered with glass canes and lampworked ornaments. Around the casket, ten archways show Biblical scenes, composed of red silk. The casket may have been designed as a reliquary. The lampworked figures and ornaments were probably made at the court glasshouse of Archduke Ferdinand of the Tyrol at Schloss Ambras (Innsbruck). Venetian glassblowers from Murano worked there from 1572 until 1591. Lampworking is the technique of forming objects from rods and tubes of glass with the aid of an oil or paraffin lamp in conjunction with bellows. The intense heat of the flame softens the glass, which can then be manipulated into the desired shape. The Alfred Williams Hearn Gift C.20-1923 [ca.1960] (en)
  • Rectangular, with flat-topped pyramidal lid. At each side are three, and at each end two, archways with opaque white caryatids in the spandrels. Within the arches are various scenes, with figures in costumes of the period. The lid is divided into panels, inlaid with blue glass and gold and white rosettes. The interior is fitted with compartments and mirrors. (en)
sameAs
dc:identifier
  • C.20-1923
P3 has note
  • The lower part of the casket is decorated with ten arched panels of glass decoration depicting biblical scenes. These panels are separated by 14 busts, male and female, from which emanate gilded 'rays' of glass. White glass 'clouds' surround their heads. The bottom edges of the casket are decorated with straight and barleysugar twist rods of glass in various combinations of colours. The bottom corners are decorated with small 'coils' of polychrome glass. Each scene in the ten arched panels is backed with silk which has faded to a neutral beige colour and some of the glass around the panels is tinned on the reverse. The upper edge of the base of the casket is edged with gimp. The style of lamp-worked decoration is close to that of a number of panels at Schloss Ambras, the place where Archduke Ferdinand of the Tyrol had his court glasshouse, from 1572 until 1591, which was manned by Venetian glassmakers. These panels were already listed in the 1596 inventory of Ambras. However, the style of the modelling, in particular of the figures, the clouds and the rays of light, are remarkably similar to that attributed to workshops in Nevers. Lamp-working was a skill that a craftsman could carry from country to country in his search for employment so it is difficult to associate these pieces with a particular manufacturing centre. The subjects depicted on the casket glass reliefs are: Moses on Mount Sinai Moses and the Brazen Serpent Three kings hanging on a tree, soldiers and dead kings below Agony in the Garden (unsure if this is what is depicted) House with trees Jacob's Dream Sacrifice of Isaac Satan and an angel below a tree, with a recumbent figure, two women below An angel among clouds, above a wood On a rock, three figures with spears; below are two women and a man driving out a boy (en)
  • The wooden structure of this casket is entirely covered with glass rods, strips of flattened glass and lamp-worked figures and ornaments. The elaborate decoration includes several scenes from the Bible, built up of lamp-worked figures and foliage, interspersed with pieces of mineral, all stuck onto the frame with a resinous material and backed with fine silk. Such fine lamp-worked scenes were first developed by Venetian glassmakers on the island of Murano. However, the style of our casket is particularly close to some lamp-worked panels in the collection of Schloss Ambras, the castle of Archduke Ferdinand of Tyrol. These panels can already be identified in the 1596 inventory of Ambras. Archduke Ferdinand II of Tyrol (1529-1595) built the extensive Ambras castle on a mountain top overlooking Innsbruck. A true “Renaissance prince” and an enthusiastic patron of the arts and sciences, Ferdinand amassed a large collections of artefacts for which he built a special display room. At Ambras, Ferdinand also ran a glass workshop from 1572 until 1591 which he manned with Venetian craftsmen from Murano. They introduced lampworking, a technique that used heat from a lamp to melt and shape the glass. It is most likely that our casket was also the work of the Venetian craftsmen working at Ambras in the Tyrol. Inside, the casket has several compartments with mirror-covered lids which were probably used to store precious objects such as jewellery. (en)
  • Wood casket with lamp-worked glass reliefs. Probably made in Venetian glassworks in Hall-in-Tyrol, Austria, late 16th or early 17th century. (en)
  • The lampworked figures and ornaments are probably made at the court glasshouse of Archduke Ferdinand of the Tyrol, at Schloss Ambras (Innsbruck). Venetian glassmakers were working there from 1572 until 1591. [2009] Casket South German or Tyrolese; 1572-1600 The wooden structure of the casket, which opens, is covered with glass canes and lampworked ornaments. Around the casket, ten archways show Biblical scenes, composed of red silk. The casket may have been designed as a reliquary. The lampworked figures and ornaments were probably made at the court glasshouse of Archduke Ferdinand of the Tyrol at Schloss Ambras (Innsbruck). Venetian glassblowers from Murano worked there from 1572 until 1591. Lampworking is the technique of forming objects from rods and tubes of glass with the aid of an oil or paraffin lamp in conjunction with bellows. The intense heat of the flame softens the glass, which can then be manipulated into the desired shape. The Alfred Williams Hearn Gift C.20-1923 [ca.1960] (en)
  • Rectangular, with flat-topped pyramidal lid. At each side are three, and at each end two, archways with opaque white caryatids in the spandrels. Within the arches are various scenes, with figures in costumes of the period. The lid is divided into panels, inlaid with blue glass and gold and white rosettes. The interior is fitted with compartments and mirrors. (en)
P43 has dimension
P138 has representation
P102 has title
  • 1575 / 1625, Austria
is P106 is composed of of
is P41 classified of
is P108 has produced of
is P129 is about of
is P24 transferred title of of
is crmsci:O8_observed of
Faceted Search & Find service v1.16.118 as of Aug 04 2024


Alternative Linked Data Documents: ODE     Content Formats:   [cxml] [csv]     RDF   [text] [turtle] [ld+json] [rdf+json] [rdf+xml]     ODATA   [atom+xml] [odata+json]     Microdata   [microdata+json] [html]    About   
This material is Open Knowledge   W3C Semantic Web Technology [RDF Data] Valid XHTML + RDFa
OpenLink Virtuoso version 07.20.3240 as of Aug 4 2024, on Linux (x86_64-pc-linux-musl), Single-Server Edition (126 GB total memory, 3 GB memory in use)
Data on this page belongs to its respective rights holders.
Virtuoso Faceted Browser Copyright © 2009-2024 OpenLink Software